A tree top pole saw for use with the Samurai 5 metre Telescopic Pole (FAI SAMPOLE sold separately).
Heavy-duty saw for cutting tree branches and dislodging dead wood up to 5 metres (16ft) high.
The Samurai Tree top pole saw from Faithfull is a 390mm, three edge saw with 6.5 teeth per 30mm. The blade is taper ground to offer minimal friction which reduces drag; the three edge teeth are precisely sharpened on their different plains for outstanding performance.
Cutting on the pull stroke provides maximum control with minimal effort and leaves a really smooth surface to reduce the risk of die back and disease.
• SK-5 High carbon steel blade Chrome plated for rust resistance
• 390mm Tri-edge saw with 6.5 teeth per 30mm
• 200mm maximum cut
• Cuts on the pull stroke for better control and less effort
• Upper sickle hook cuts smaller vines and dislodges dead branches
• Lower sickle cuts bark to avoid bark stripping
• Complete with protective guard
• Quick release
It is the responsibility of the user to comply with all necessary precautions for safety.
DO NOT USE POLE SAW NEAR OVERHEAD POWER LINES OR ELECTRICAL CABLES. Failure to heed this warning may result in serious injury or death by electrocution.
Improper use of this pole saw can cause serious or fatal injury. DO NOT cut above your head. Always stand to one side and be prepared with an unobstructed emergency exit path. For safety precautions always wear a hard hat and eye protection.
The saw is extremely sharp. Contact with the blade may cause serious injury.
Always attach the saw to the pole with the blade guard on and exercise extreme care when installing or removing the blade cover.
|FAISAMPOLSAW||Samurai Pole Saw 390mm Tri Cut||£47.41||£56.89||Toolbank|
|Change Currency: £ €|
No User Reviews for Samurai Pole Saw 390mm Tri Cut
Copyright © Faithfull Tools 2012 - 2019.