• Clamps sheet metal panels edge to edge
• Clamps flat, curved and pressed ribbed panels
• Simple to use for assembling and fabricating
• Ideal for welding patch repairs in floors, wings and door skins
• Easy to install and remove
Butt-weld clamps are an essential accessory for aligning sheet metal panels edge-to-edge and surface-to-surface. They provide the correct gap to help produce clean welds, requiring minimal grinding after completion.
Ideal for use when welding patch repairs in floors, wings, door skins or fabricating panels on reskinning projects. These versatile clamps will hold flat, curved and pressed ribbed panels.
Using the clamps to assemble the workpiece
Slacken the wing nut allowing space for the metal sheets to locate between the base of the clamp, with the toggle bar underneath, Tighten the wing nut to pull the toggle bar up locking the two sheets together side by side. Once the two sections have been tack welded together, the wing nut can be slackened and the toggle bar removed, the clamp can then be lifted from the job prior to final welding.
|Change Currency: £ €|
|FAIBWCLAMPS4||Sheet Metal Butt Welding Clamps 4 Piece||£19.11||£22.93||Toolbank|
There are no questions for Sheet Metal Butt Welding Clamps 4 Piece
Copyright © Faithfull Tools 2012 - 2018. All rights reserved.